Product Description

Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling

Product Description

Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.

Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc

Coupling performance

1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CHINAMFG requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.

How to select the appropriate coupling type

The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.

If you cannot determine the type, you can contact our professional engineer

Related products

Company Profile

Our Equipments

Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.

Machining equipments
Heat equipment

Our Factory
Application – Photos from our partner customers

Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Can mechanical couplings compensate for shaft misalignment and vibrations?

Yes, mechanical couplings can compensate for shaft misalignment and vibrations to a certain extent, depending on their design and flexibility. The ability to accommodate misalignment and dampen vibrations is a key feature of many mechanical couplings, making them suitable for a wide range of applications. Here’s how they achieve these compensatory functions:

1. Shaft Misalignment Compensation:

Mechanical couplings, especially flexible couplings, are designed to handle various types of shaft misalignment, which can occur due to installation errors, thermal expansion, or dynamic loads. The following types of misalignment can be compensated by specific couplings:

• Angular Misalignment: Some flexible couplings, like Oldham couplings or universal couplings (Hooke’s joints), can accommodate angular misalignment between the shafts.
• Parallel Misalignment: Elastomeric or rubber couplings, such as jaw couplings or tire couplings, can compensate for parallel misalignment.
• Axial Misalignment: Certain types of flexible couplings, like beam couplings or bellows couplings, can tolerate axial misalignment.

2. Vibration Damping:

Flexible couplings are particularly effective at dampening vibrations in mechanical systems. The flexible elements or materials used in these couplings absorb vibrations caused by imbalances or dynamic loads, reducing the transmission of vibrations to connected components. This feature helps in:

• Reducing wear and fatigue on bearings, gears, and other components.
• Minimizing noise and improving the overall system’s smooth operation.
• Protecting sensitive equipment from excessive vibrations.

3. Limitations:

While mechanical couplings can compensate for some degree of misalignment and dampen vibrations, they have limitations:

• Excessive misalignment: Couplings have their specified misalignment limits. If misalignment exceeds these limits, it may lead to premature wear or coupling failure.
• High-frequency vibrations: Some couplings may not effectively dampen high-frequency vibrations, and additional measures might be needed to control vibrations in such cases.
• Resonance: Couplings can introduce or exacerbate resonance in a system if not selected properly for the application.

Overall, mechanical couplings with misalignment compensation and vibration damping properties play a crucial role in ensuring smooth and reliable operation of mechanical systems. Proper selection and installation of the appropriate coupling based on the specific application requirements are essential to maximize their compensatory capabilities.

“`

How to troubleshoot common issues with mechanical couplings and their solutions?

Mechanical couplings may experience various issues during their operational life. Identifying and troubleshooting these issues promptly is essential to ensure the optimal performance and reliability of the mechanical system. Here are some common coupling problems and their solutions:

1. Misalignment:

Issue: Misalignment between the connected shafts can lead to premature wear, vibration, and reduced efficiency.

Solution: Check and adjust the alignment of the shafts. Properly align the coupling using shims or adjustable couplings to eliminate misalignment. Regularly inspect and correct any misalignment to avoid further issues.

2. Excessive Vibration:

Issue: Excessive vibration can result from misalignment, worn components, or resonance within the system.

Solution: Inspect the coupling for signs of wear, corrosion, or misalignment. Replace worn or damaged components and ensure proper alignment. If resonance is causing vibrations, consider dampening solutions or changing the coupling type to one better suited to the application.

3. Overheating:

Issue: Overheating of the coupling may occur due to excessive friction or inadequate lubrication.

Solution: Check the coupling for proper lubrication and use the recommended lubricant as per the manufacturer’s guidelines. Ensure that the coupling is not overloaded, as excessive torque can lead to overheating. Reduce the load or choose a higher torque-rated coupling if necessary.

4. Backlash:

Issue: Backlash, also known as play or free movement between the coupling components, can affect precision and accuracy in certain applications.

Solution: For applications requiring minimal backlash, choose couplings with low or zero backlash characteristics, such as gear couplings or servo couplings. Regularly inspect and replace worn or damaged components that may contribute to increased backlash.

5. Noise:

Issue: Unusual noises, such as clanking or rattling, may indicate misalignment, worn components, or improper installation.

Solution: Conduct a thorough inspection of the coupling and associated components. Correct any misalignment, replace worn parts, and verify proper installation. Ensure that all fasteners are properly tightened.

6. Premature Wear:

Issue: Premature wear of coupling components can lead to reduced coupling life and system reliability.

Solution: Regularly inspect the coupling for signs of wear and damage. Implement a preventive maintenance program with scheduled inspections and lubrication. Follow the manufacturer’s guidelines for maintenance and installation to maximize the coupling’s lifespan.

By promptly addressing these common issues and implementing appropriate solutions, the mechanical system can operate smoothly, efficiently, and reliably with minimal downtime and maintenance requirements.

“`

What is a spline coupling?

A spline coupling is a type of mechanical coupling used to connect two shafts, allowing torque transmission between them while allowing a small amount of relative movement or misalignment. The term “spline” refers to the ridges or teeth on the coupling’s inner or outer surface, which engage with corresponding ridges or grooves on the shafts.

Spline couplings are commonly used in applications where precise torque transmission, rotational alignment, and axial movement are required. They offer several advantages:

1. Torque Transmission:

By using the interlocking ridges or teeth, spline couplings provide a secure connection between the shafts, ensuring efficient torque transfer from one shaft to the other.

2. Misalignment Compensation:

Spline couplings can accommodate a small amount of angular and parallel misalignment between the connected shafts, allowing flexibility in the mechanical system and reducing stress on bearings and other components.

3. Axial Movement:

Some spline couplings, such as spline shafts, allow limited axial movement, making them suitable for applications where shafts may experience thermal expansion or contraction.

4. High Precision:

Spline couplings provide high precision and repeatability in motion control applications. They are commonly used in robotics, machine tools, and automotive transmissions.

5. Different Types:

There are various types of spline couplings, including involute splines, straight-sided splines, and serrated splines, each with different designs and applications.

It is important to note that spline couplings require precise machining and assembly to ensure proper engagement and torque transmission. They are typically used in applications where high torque, precision, and flexibility are necessary for the system’s performance.

“`

editor by CX 2024-02-05