China best CHINAMFG Customized Jaw Shaft Coupling, Spline Shaft Coupling, Jaw Coupling for Plunger Pump spline coupling

Product Description

Densen Customized Jaw shaft Coupling, Spline Shaft Coupling, Jaw coupling for plunger pump

 

Product Name Densen Customized Jaw shaft Coupling, Spline Shaft Coupling, Jaw coupling for plunger pump
DN mm 16~190mm
Rated Torque 40~25000 N·m
Allowable speed 4500~200 kN·m
Material 45#steel
Application Widely used in metallurgy, mining, engineering and other fields.

 

Product show

Company Information

Equipment

 

Application Case

Typical case of diaphragm coupling applied to variable frequency speed control equipment

JMB type coupling is applied to HangZhou Oilfield Thermal Power Plant

According to the requirements of HangZhou Electric Power Corporation, HangZhou Oilfield Thermal Power Plant should dynamically adjust the power generation according to the load of the power grid and market demand, and carry out the transformation of the frequency converter and the suction fan. The motor was originally a 1600KW, 730RPM non-frequency variable speed motor matched by HangZhou Motor Factory. The speed control mode after changing the frequency is manual control. Press the button speed to increase 10RPM or drop 10RPM. The coupling is still the original elastic decoupling coupling, and the elastic de-coupling coupling after frequency conversion is frequently damaged, which directly affects the normal power generation.

It is found through analysis that in the process of frequency conversion speed regulation, the pin of the coupling can not bear the inertia of the speed regulation process (the diameter of the fan impeller is 3.3 meters) and is cut off, which has great damage to the motor and the fan.

Later, they switched to the JMB460 double-diaphragm wheel-type coupling of our factory (patent number: ZL.99246247.9). After 1 hour of destructive experiment and more than 1 year of operation test, the equipment is running very well, and there is no Replace the diaphragm. 12 units have been rebuilt and the operation is in good condition.

 

Other Application Case

 

Spare parts

 

Packaging & Shipping

 

Contact us

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

spline coupling

Can mechanical couplings compensate for shaft misalignment and vibrations?

Yes, mechanical couplings can compensate for shaft misalignment and vibrations to a certain extent, depending on their design and flexibility. The ability to accommodate misalignment and dampen vibrations is a key feature of many mechanical couplings, making them suitable for a wide range of applications. Here’s how they achieve these compensatory functions:

1. Shaft Misalignment Compensation:

Mechanical couplings, especially flexible couplings, are designed to handle various types of shaft misalignment, which can occur due to installation errors, thermal expansion, or dynamic loads. The following types of misalignment can be compensated by specific couplings:

  • Angular Misalignment: Some flexible couplings, like Oldham couplings or universal couplings (Hooke’s joints), can accommodate angular misalignment between the shafts.
  • Parallel Misalignment: Elastomeric or rubber couplings, such as jaw couplings or tire couplings, can compensate for parallel misalignment.
  • Axial Misalignment: Certain types of flexible couplings, like beam couplings or bellows couplings, can tolerate axial misalignment.

2. Vibration Damping:

Flexible couplings are particularly effective at dampening vibrations in mechanical systems. The flexible elements or materials used in these couplings absorb vibrations caused by imbalances or dynamic loads, reducing the transmission of vibrations to connected components. This feature helps in:

  • Reducing wear and fatigue on bearings, gears, and other components.
  • Minimizing noise and improving the overall system’s smooth operation.
  • Protecting sensitive equipment from excessive vibrations.

3. Limitations:

While mechanical couplings can compensate for some degree of misalignment and dampen vibrations, they have limitations:

  • Excessive misalignment: Couplings have their specified misalignment limits. If misalignment exceeds these limits, it may lead to premature wear or coupling failure.
  • High-frequency vibrations: Some couplings may not effectively dampen high-frequency vibrations, and additional measures might be needed to control vibrations in such cases.
  • Resonance: Couplings can introduce or exacerbate resonance in a system if not selected properly for the application.

Overall, mechanical couplings with misalignment compensation and vibration damping properties play a crucial role in ensuring smooth and reliable operation of mechanical systems. Proper selection and installation of the appropriate coupling based on the specific application requirements are essential to maximize their compensatory capabilities.

“`spline coupling

Are there any safety considerations when working with mechanical couplings?

Yes, working with mechanical couplings involves some safety considerations to prevent accidents and ensure the well-being of personnel. Here are important safety measures to keep in mind:

1. Lockout/Tagout Procedures:

Prior to working on machinery with mechanical couplings, implement lockout/tagout procedures to ensure that the equipment is isolated from its power source and cannot be accidentally energized during maintenance or repair activities.

2. Proper Training:

Ensure that personnel working with mechanical couplings receive proper training on safe handling, installation, and maintenance procedures. Adequate knowledge of coupling types, torque limits, and alignment techniques is crucial to avoid accidents.

3. Personal Protective Equipment (PPE):

Wear appropriate personal protective equipment, such as gloves, safety goggles, and hearing protection, when installing or inspecting couplings. This helps prevent injuries from sharp edges, rotating parts, or potential flying debris.

4. Follow Manufacturer’s Guidelines:

Always follow the manufacturer’s guidelines and instructions for the specific coupling being used. Proper installation torque, maintenance schedules, and safety precautions provided by the manufacturer should be strictly adhered to.

5. Inspections:

Regularly inspect the couplings for signs of wear, misalignment, or damage. Any worn or damaged couplings should be replaced promptly to prevent failures during operation.

6. Avoid Overloading:

Do not exceed the torque and speed limits specified by the manufacturer for the coupling. Overloading the coupling can lead to premature failure and potential safety hazards.

7. Preventive Maintenance:

Implement a preventive maintenance program to regularly check and service the couplings as recommended by the manufacturer. Proper maintenance can extend the life of the coupling and prevent unexpected failures.

8. Proper Storage:

Store spare couplings in a safe and dry environment, away from potential damage or exposure to harmful substances. Protect the couplings from corrosion and contamination.

9. Emergency Procedures:

Have emergency procedures in place in case of coupling failure or accidents. Employees should know how to respond to unexpected incidents safely.

10. Proper Lifting and Handling:

When installing or removing heavy couplings, use appropriate lifting equipment and techniques to prevent strain or injuries.

By following these safety considerations, workers can reduce the risk of accidents and ensure a safe working environment when dealing with mechanical couplings.

“`spline coupling

How do splined couplings work?

Splined couplings work by using interlocking ridges or teeth on the coupling and the connected shafts to transmit torque while allowing some degree of misalignment and axial movement. The operation of splined couplings can be understood in the following steps:

1. Spline Design:

The coupling and the shafts are machined with matching ridges or teeth along their surfaces. These ridges form the spline. There are various spline designs, including involute splines, straight-sided splines, and serrated splines, each with different tooth profiles and configurations.

2. Engagement:

When the splined coupling is fitted onto the shafts, the ridges on the coupling engage with the corresponding grooves on the shafts, creating a secure and positive connection. The engagement can be internal, where the coupling fits inside the shafts, or external, where the coupling fits over the shafts.

3. Torque Transmission:

When torque is applied to one of the shafts, the ridges on the coupling transmit the torque to the other shaft, allowing rotational motion to be transferred between the two shafts.

4. Misalignment Compensation:

Splined couplings can accommodate a small amount of misalignment between the shafts. This misalignment can be angular, where the shafts are not perfectly aligned, or parallel, where the shafts are slightly offset from each other. The splined design allows the coupling to flex slightly, accommodating these misalignments and reducing stress on the shafts and other components.

5. Axial Movement:

Some spline couplings, such as spline shafts, can also allow for limited axial movement. This axial play is useful in applications where thermal expansion or contraction of the shafts may occur, preventing excessive forces on the system.

Splined couplings are commonly used in precision motion control systems, automotive drivetrains, industrial machinery, and other applications where accurate torque transmission and flexibility in alignment are essential. Proper machining and assembly are critical to ensuring precise engagement and reliable operation of splined couplings in various mechanical systems.

“`
China best CHINAMFG Customized Jaw Shaft Coupling, Spline Shaft Coupling, Jaw Coupling for Plunger Pump   spline couplingChina best CHINAMFG Customized Jaw Shaft Coupling, Spline Shaft Coupling, Jaw Coupling for Plunger Pump   spline coupling
editor by CX 2024-05-07

Spline Coupling

As one of spline coupling manufacturers, suppliers and exporters of mechanical products, We offer spline coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of spline coupling.

 

Recent Posts