We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Centrifugal Horizontal Ultra Chrome alloy AH Slurry Pump
Introduction:
1. HS series slurry pump is developed for the continuous pumping of large abrasive, substantial density slurries with minimum routine maintenance demands. The donning parts are made of ultra chrome or and rubber. It will preserve large effectiveness above the use daily life of its parts.
2. The steel moist parts and rubber kinds can be interchangeable for managing different liquids or slurries.
3. HS slurry pumps are obtainable in dimensions ranging from 1 inch to eighteen inch discharge and characteristic higher effectiveness performance capable of flow charges from 10.8 to 5400 m³/h and heads up to one hundred twenty five meters for substantial head types.
Attributes:
1. Cylindrical framework of bearing assembly: hassle-free to adju EPT the place amongst impeller and EPT liner
and can beremoved comple tel: +86~thirteen 0571 88828y
two. Interchangeable anti-abrasive wet parts created of higher-chrome alloys
3. Casing halves of ductile iron with exterior reinforcing ribs provide large working strain abilities
and an extra evaluate of security.
four. The discharge branch can be oriented to any 8 positions at the interval of 45 degrees
five. Numerous travel varieties: DC(direct connection), V-belt generate, equipment box reducer, hydraulic couplings, VFD,
S EPT control, etc
6. The shaft seal uses the packing seal, expeller seal and mechanical seal
Normal Application:
• Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
• Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
• Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
• Lime mud | • Phosphoric acid | • Dredging | • Development |
• Alumina Industry | • Power Plant | • Potash Fertilizer Plant | • EPT industries |
• Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
Design | Max Energy (Kw) |
Inlet & Outlet size (inch) | Material for Wear Elements | Flow Price (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
m³/hr | l/s | |||||||
25HS-B | 15 | 1.5/one | M | 12.6~28.eight | three.5~eight | 6~sixty eight | 1200~3800 | 152 |
R | 10.8~twenty five.two | three~seven | 7~52 | 1400~3400 | 152 | |||
40HS-B | 15 | two/1.5 | M | 32.4~seventy two | 9~twenty | six~58 | 1200~3200 | 184 |
R | twenty five.2~fifty four | seven~15 | 5.5~41 | a thousand~2600 | 178 | |||
50HS-C | 30 | 3/2 | M | 39.6~86.four | 11~24 | 12~sixty four | 1300~2700 | 214 |
R | 36~seventy five.6 | ten~21 | 13~forty six | 1300~2300 | 213 | |||
75HS-C | 30 | four/3 | M | 86.4~198 | 24~55 | nine~fifty two | a thousand~2200 | 245 |
R | seventy nine.2~one hundred eighty | 22~fifty | 5~34.5 | 800~1800 | 245 | |||
100HS-D | 60 | six/four | M | 162~360 | forty~one hundred | twelve~56 | 800~1550 | 365 |
R | 144~324 | 40~ninety | 12~forty five | 800~1350 | 365 | |||
150HS-E | 120 | 8/six | M | 360~828 | one hundred~230 | ten~sixty one | five hundred~1140 | 510 |
R | 324~720 | ninety~200 | seven~49 | 400~1000 | 510 | |||
200MS-E | one hundred twenty | 10/eight | M | 666~1440 | 185~four hundred | fourteen~60 | 600~1100 | 549 |
200HS-ST | 560 | 10/eight | M | 612~1368 | a hundred and seventy~380 | eleven~61 | four hundred~850 | 686 |
R | 540~1188 | a hundred and fifty~330 | 12~fifty | 400~750 | 686 | |||
250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | 7~sixty eight | 300~800 | 762 |
R | 720~1620 | two hundred~450 | seven~45 | three hundred~650 | 762 | |||
300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | thirteen~sixty three | 300~600 | 965 |
R | 1152~2520 | 320~seven-hundred | 13~44 | three hundred~five hundred | 965 | |||
350HS-TU | 1200 | 16/fourteen | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
450HS-TU | 1200 | 20/18 | M | 2520~5400 | 700~1500 | thirteen~fifty seven | 200~400 | 1370 |
25HHS-C | 30 | one.5/one | M | sixteen.2~34.2 | four.5~9.5 | twenty five~92 | 1400~2200 | 330 |
50HHS-D | sixty | 3/2 | M | sixty eight.4~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
75HHS-E | 120 | 4/three | M | 126~252 | 35~70 | twelve~ninety seven | 600~1400 | 508 |
100HHS-E | a hundred and twenty | six/4 | M | 324~720 | ninety~200 | thirty~118 | 600~1000 | 711 |
150HHS-S | 560 | eight/six | M | 468-1008 | one hundred thirty~280 | 20~94 | five hundred~one thousand | 711 |
For the content of donning components,
“M” = metallic, extremely chromium alloy “R” = anti-abrasive rubber
Contact
Welcome to get in touch with us any time for particulars.
Your inquiry will get our prompt consideration and response !
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 various branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original products manufacturer’s (OEM) element numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our business and the shown substitute parts contained herein are not sponsored, accepted, or made by the OEM.