Working with Chain Beneath Different Temperature

For Use at Low-temperature
When employing conveyor chains at low-temperature such as in a fridge or in the cold atmosphere, the following circumstances may well arise.
one) Lower temperature brittleness
On the whole, a material is embrittled at low-temperature and shock resistance is lowered. This phenomenon is named low-temperature brittleness, plus the degree of embrittlement differs from material to materials.
The services restrict of the conveyor chain will depend on its specs.
2)Influence of freezing
At low-temperature, bending failure, roller rotation failure, repairing of chain, etc. may be brought about from the freezing of penetrated water or deposited frost during the clearance involving pins and bushings, bushings and rollers or inner plates and outer plates. These problems induce an overload to act on the chain and drive, diminishing the daily life with the chain.
To stop freezing, normally, it is suggested to fill the clearances using a low-temperature lubricant ideal towards the support temperature to stop water, frost, and so forth. from penetrating the respective portions of the chain. For lubrication, a silicon based mostly grease is encouraged.
For Use at High-temperature
Chains power is diminished by high-temperature ambiance, direct conveying of high-temperature loads, or radiated heat, and so forth. The services limit at high-temperature depends not around the temperature in the service surroundings however the temperature and materials from the chain body.
Following situations may perhaps take place when chains are used at high-temperature:
1) High temperature brittleness and fracture by lowered hardness of heat treated material
two) Brittleness induced by carbide precipitation
3) Abnormal wear by scale
4) Fatigue fracture caused by repeated thermal shock (cooling and growth)
5) Abnormal dress in on account of a rise inside the coefficient of friction
six) Creep fracture
seven) Fracture as a consequence of thermal fatigue of welded place
8) Effects brought about by thermal expansion
?Stiff back links and rotation failure on account of decreased clearance ?Fatigue fracture because of lowered fitting force
9)Lubrication failure and stiff links as a consequence of deterioration and carbonization of lubricating oil
Grease superb in heat resistance include people according to silicon, graphite or molybdenum disulfide.
For use at high-temperature, high-temperature resistance bearings and stainless steel bearings are advised.


Spline Coupling

As one of spline coupling manufacturers, suppliers and exporters of mechanical products, We offer spline coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of spline coupling.


Recent Posts